Commercial site protection across Toronto and the GTA
Finish & appearance
Where the bollard is visible to customers and the finish is part of the design. Satin stainless in flat top and domed round profiles, corrosion resistant and low maintenance: appropriate for store fronts, plazas, building entrances and any frontage where a painted steel post would look like an afterthought.
Not sure which option fits?
Send a photo of the location and tell us what you are protecting. We will specify it and quote it within 24 hours, including the cheaper option if that is the right one.
Specifications
SBD-FTSSB436
Product code: SBD-FTSSB436
The slimmer size, for frontages and entrances where the bollard has to protect without dominating the approach. Flat top, satin finish and a green reflective band.
| Material | Stainless Steel |
|---|---|
| Finish | Satin |
| Size | 4″ × 36″ |
| Reflective tape | Green |
SBD-FTSSB648
Product code: SBD-FTSSB648
The heavier size at 6 inches and 48 inches tall, where the approach carries larger vehicles or the bollard needs to read clearly from further back.
| Material | Stainless Steel |
|---|---|
| Finish | Satin |
| Size | 6″ × 48″ |
| Reflective tape | Green |
SBD-SSB436
Product code: SBD-SSB436
Domed top, satin stainless, on an 8 inch base plate. The slimmest of the round range: for entrances and walkway edges where the post should read as part of the frontage.
| Material | Stainless Steel |
|---|---|
| Finish | Satin |
| Size | 4″ × 36″ |
| Base plate | 8″ |
| Reflective tape | Red / Yellow / Black |
SBD-SSB4536
Product code: SBD-SSB4536
A half inch wider than the 4 inch, on the same 8 inch base plate. The common choice where the frontage sees regular vehicle movement rather than the occasional reversing car.
| Material | Stainless Steel |
|---|---|
| Finish | Satin |
| Size | 4.5″ × 36″ |
| Base plate | 8″ |
| Reflective tape | Red / Yellow / Black |
SBD-SSB6636
Product code: SBD-SSB6636
The heavy 6.6 inch shaft on a wider 11.5 inch base plate, at 36 inches tall. Specified where the vehicle likely to hit it is larger than a car.
| Material | Stainless Steel |
|---|---|
| Finish | Satin |
| Size | 6.6″ × 36″ |
| Base plate | 11.5″ |
| Reflective tape | Red / Yellow / Black |
SBD-SSB6648
Product code: SBD-SSB6648
The tallest and heaviest of the round range: 6.6 inches across and 48 inches above grade, for yards, service courts and anywhere the post has to be seen from a truck cab.
| Material | Stainless Steel |
|---|---|
| Finish | Satin |
| Size | 6.6″ × 48″ |
| Base plate | 11.5″ |
| Reflective tape | Red / Yellow / Black |
Before you order
The 4in and 4.5in sizes at entrances, lobbies and pedestrian frontages, where the bollard should protect without dominating the approach. The 6in and 6.6in sizes where the vehicles are larger. Go to 48in tall where the post has to be seen from a truck cab rather than a car. If you are unsure, send a photo of the location and we will specify it.
Stainless where customers see it and where you do not want to repaint. Painted yellow steel where being seen matters more than the finish: a warehouse aisle or a dock apron. Stainless costs more up front and saves the annual repaint.
The round range comes with a red, yellow or black band and the flat tops carry green. Yellow reads as hazard and suits service areas; black is the quietest against a stainless post and suits a design-led frontage; red sits between the two. Tell us the site standard you are working to and we will match it.
Be careful with this question. These are protective and deterrent bollards for the applications described here. They are not crash-rated. If your project requires certified anti-ram performance to ASTM F2656 or IWA 14-1, we will say so and refer you to a rated manufacturer.
Tell us what you are protecting and from what. We will come back with a part number, a price and a date.
